Axis Point TM Heat Exchanger System
NEW Patented Design

Super Quad Axis Point TM Heat Exchanger with it's Special Internal Patented  Design. Has 80 ft. of Heavy Walled Stainless 3500 psi rated Tubing to give you SUPER HEAT TODAY!
Dimensions: 18 in X 8 6/16 in O.D.
Regular Price: $1395.00 add $100 S/H
Item # HTR142




HOT DEALS (HERE)
Mighty Might TM Exaust Diverters


Front Panel Controlled with easy Hook-up 1" NPT
Provides you with a Manual Clamping or Front Panel controled.
Sale Price: $425.00 
Item # DVR30    
(1 Year Warranty)
Rugged All Stainless Steel Construction
Dimensions: 3 in X 3 in X 2in
(1 Year Warranty)    SAVE $70.00
Say Good Bye to Copper Core Propane Heat Exchangers that Blow Up at 900 psi Like so many of the Name Brand 
All  our Heaters are High Pressure Tested @ 3500 PSI
Introduction to a "Innovative Way" of Heating Water
We build our Heat Exchangers using a Revolutionary "State of the Art" Design known as Axis Point Technology TM. This Unique Design allows the Heat Exchanger Tubing carring the water to source out Maximum Exhaust Heat with Maximum Heat Transfer.

Heat you can always depend on even through the Toughest Jobs. Our Heat Exchangers deliver up to 230 Degrees Plus. This Axis Point Technology means Continuous Hotter Water Longer. This NEW Design will Minimize 'Wide Fluctuations' of Temperature which is inherent in 'OLD ART' Heat Exchangers. 

The primary purpose of Axis Point Heaters TM is to ELIMINATE the need for Expensive Economy/Budget Challenging Alternative Fuels such as Propane and Fuel Oil.

Opinions are offered for our Heaters are supported by many Satisfied Customers (The End Users). They all Claim Exceptional Heat is produced with a sudden rise in Temperature within 1 minute and stable which allows the End User to get Maximum Heat Performance.
Hotter Water & more Stable!
Exhaust or Coolant We can Custom make your Heat Exchanger for either 
(Slide-In and PTO Truck Mounts)
Now you can do your Flood Clean-up jobs without the worry of Heat! 
                                           All Stainless Pre-Heaters
Supercharge your Heat and Give your Truck Mount the Head Start it needs, especially in the Cold Winter Months. 

We can Custom Fit this Pre-Heater to most Truck Mounts.
We can sell you all the Stainless Flex Pipe you need (seamed) or Heavy Duty Corregated (Seamless).....and
S/S T-Bolt Clamps & Associated Fittings for Easy Hook-Up!
Regular Price is: $495.00 
Regular Price is: $695.00
Sale Price: $659.95 add $39.95 S/H
Item #  PRHTR41
White Magic Model 1200
PTO using our Custom Made
Heat Exchanger Using Radiator
Coolant to Heat the water
             Kohler Engine Header / Exhaust Diverter Combo
Control Your Machine's Heat!
With our All Stainless Heavy Gauged Precision Exhaust Diverters 
Regular Price: $495.00
Sale Price: $425.00  SAVE $70
Item # HDR31 (1 inch Pipe)
Header & Exhaust Diverter Combo
Regular Price: $655.00
Sale Price: $599.95   SAVE $55.05
Item # HDRED32 ( For 1 inch, 1.25 inch & 1.5 inch Pipe)
Heavy Duty Corrugated Stainless Flex Pipe
Stainless Interlocking Flex Pipe
Available in 1.25 & 1.5 inch
Minimun 2 ft. @ 15.50 / ft.
add S/H
Available in 1.25 & 1.5 inch
Minimun 3 Ft. @ 15.50 / ft.
add S/H
Stainless T-Bolt Clamps
Available to fit 1.25 & 1.5 inch Pipe
$12.75 each includes S/H
QTY 2
Carpet Cleaners Looking for a better way to heat your water in your old or new Truck Mount?

..............ADD EQUITY TO YOUR TRUCK MOUNT TODAY! In this "HARD TO FIND" A " Carpet Cleaning Heat Exchanger" Type Industry, we have  the (One & Only) New Design Axis Point TM Heat Exchanger. We manufacture these fine Heaters at our Custom Weld & fab Shop here in Holiday Florida and most important, at a price you can afford!

Our all Stainless Heaters are Pressure Rated @ 3500 psi and can transfer the heat into the water quicker than any other Heat Exchanger. This means higher heat, more stability with less fluctuation in temperature.....and most Important safety!
                                                                     (CLICK HERE)
In a challenging Economy that means your machine can do more job activities from Carpet Cleaning to High Pressure Surface Cleaning.

Sometimes the difference between buying a New truck Mount and keeping your old one is the heat, so why leap, when we can get you that Heat!
Special Note
We can Custom Design the Mounting Brackets to Fit any where on your Machine. 
2000 psi Balance Relief Valve 
Item # PRV42      $85.00  add S/H
Available in pressure ratings up to 3500 psi
       Point Technology
 Testimonials    Emails & Telephone #'s furnished upon request

    John Luciano / Grout Perfect

We just got our Blue Baron a couple of weeks ago. The Heat is exactly how it is advertised. I tool a beat up carpet and made it look like new and dried in about an hour.
Nothing beats the Heat of this system.

From: Solon, Ohio
Email: SmartInternet4@yahoo.com

Dean Dobson                                                                                                                                 Thursday, 8/6/09, 1:21 PM

Peter, When our heat exchanger went out i started lookig for a replacement. The manufacturer wanted $1500.00 for a replacement. Then i saw your ad and called. I asked ah mn of questions due to the fact that our unit is a direct drive and heats with the water from the radiator. You were very patient with me, answered every question, 
so i decided to give it a try and i am glad i did your heat exchanger is awesome. A-Plus Carpet Care From:Greenville, S.C.

Derrick Hamilton                                                                                                                              Sunday, 8/2/09, 11:42 AM

I have the model 45 SE and it has been working so great. And whenever it has a problem pete is very helpful in how to fix it. This is the best heating system i've ever used. From:Michigan

Steve Clayton                                                                                                                                     Sunday, 5/24/09, 5:17 PM  

Bought the unit about a year ago. This thing is HOT!!! I have burned myself numerous times because of the heat it puts out. Peter is a extremely patient person. I used a portable unit before my purchase, what a difference. He does what he says and answers all your questions. I am waiting for the CD's he now offers and would refer anyone wanting this unit, and if your here in Texas, come on by to see it work..... From:lockhart, tx

Eduardo De Rose                                                                                                                            Saturday, 2/14/09, 11:53 AM 

Great equipment, awesome Heat, easy to operate . Want to keep working with Peter. Muy buen equipo, intercambiador de calor excelente y facil de operar. recomendable Eduardo De Rose From:palm beach county

Kerry Davis                                                                                                                                       Monday, 2/9/09, 10:06 AM

I have bought the model 45 SE. Looking forward to pickup. I like the looks of the machine and your attention to craftsmanship. Quality work is hard to find in 2009. Jesus Saves!!! From:Alabama

John Spears                                                                                                                                      Monday, 11/02/09, 9:45 AM

I had Pete build a Heat Exchanger for my Prochem Performer about 8 Months ago...the price was great and the service was awesome! We had no problems installing it and we are very satisfied with the results. I would recommend Pete to anyone without hesitation. Thanks for a great product at a fair price! John Spears Signature Carpet Care

From: Utah     

Email: andrea@yourfavoritecleaner.com


Charles Wickline                                                                                                                                             St.Albans, WV
I bought a Blue Baron 36 SE and it has it has been an awesome machine, plenty or pressure and vacuum.I have worked 10 years for a National Franchise S....S.... and their machines did not get as Hot as the Blue Baron Carpet Cleaning Machine  I purchased! The Heat comes up fast, hotter and longer than the competion I worked for. I am very satisfied, Thanks.


Unlike most Fabricators, we are open 6 days per week up to 9PM (Closed Sunday)  to help you in the installation process. 

Just to show you we care about the Installation of your Heat Exchanger we are offering the 1st Hour of Labor FREE to "Tailor Fit" your Heater into your machine.

I want this to work for you! 

Thank you. 
Sincerely Pete Garland (Owner, Designer & Builder)
A Heat Exchanger Designed for Prochem 800A for a Customer in Phenoix, Arizona
A 30 inch Pre-Heater Custom Ordered to fit 19 inches on Center
Warranty Information

Since Axis Point's Inception into the Market Place since 2006, we have sold a Thousands of Heat Exchangers with Great Success Stories of the High Quality & Performance of Heat these Heat Exchangers produce. All Our Heat Exchangers are Warranted for 1 year regarding defects & Workmanship.We build our All Stainless Heat Exchangers from the Highest Quality Materials and Skillful labor in the Industry. We have a No Refund No Return Policy except for Warranty Repair.(*NOTE*Warranty starts from the actual Date of Purchase)

Our Heat Exchangers have a Well Engineered Internal Tubular Support System that Guarantees "Long  Life" and Performance for your unit

The Following conditions will void the Warranty:

Freezing  of the Heat Exchanger Tubing (Always winterize when not in use during Cold weather)

Mineral Deposit Build up in the Coils (Mostly can be advoided by Descaling with an Acid Rinse & the use of a Water Softening System) 

Cutting the Heat Exchangers Casing & Associated Fittings 

Tampering & Alterations

Operating the Heat Exchanger with No Water running through it 

Performance and results will vary depending on the Engine's Speed, Horse Power, Engine Brand, Number of Jets used on your Wand, GPM Flow Rate, Devices such as Exhaust Diverter, Pre-Heater / Water Box utilization, Exhaust Header, Pipe Connections and Carpet Cleaners method of cleaning (Ratio of Extraction vs. Expulsion of Detergent) Etc. Always use an Industry Standard Pulse Hose or Dampener to minimize wear and tear on fittings, Coils and Hoses. 
CALL US at (727) 505-2989 ask for Pete

We are open 7 days per week to Help you in the Installation Process. We will sketch installment alternatives and Scan diagrams unique to your unit to send by Email or Fax. Send us your pictures of your machine, manual diagrams Etc.

Our Goal is to get you up and running with the Best Heat Exchanger in the Industry!

The Best in Carpet Cleaning Heat Exchangers is Here!!








Enlarged Here
Commonly used Terms for the Industry are:

Truck Mount Carpet Cleaning Machines

Truck Mount Carpet Cleaning Equipment

Carpet Cleaning Machines

Carpet Cleaning Equipment

Carpet Cleaning Extractors

Carpet Extractors

Extractors

Steam Cleaning Machines

Truck Mounts

Carpet Cleaners

Hot Heat Exchangers

Hottest Heat Exchangers

Patented Heat Exchanger

Axis Pint Heat Exchanger

Truck Mount Heat Exchanger

Carpet Cleaning Heat Exchanger

Axis Point Heat Exchanger with its Patented Proven Internal Design has created the Nations Hottest Heat Exchanger unmatched by its Competition.




Prochem Performer Cub XL
Pictures of a Custom Built Axis Point TM
Heat Exchanger  for Prochem After Markets (Here)
Why Avoid Propane and Fuel Oil??
Click Here
U.S. PATENT NO. 8,141,199
Special Note:
Send us pictures. We will sketch Diagrams to help you in the Installation Process.
Specifications:  3500 psi Pressure rating
                           All Stainless Steel Constructed
                           33 Inches X 4 Inches
                           Available in 1 inch / 1 1/2 inch Female Exhaust Flanges
                           Mounting Brackets to Fit Your machine
Replace your "OLD ART " Heat Exchanger today with our Patented Axis Point Heat Exchanger with
3500 psi allowing you to operate your machine in a Multi-Functional Level Unlike the Name Brand Truck Mounts. Get the most from your Truck Mount  today!
Controlled by a Universal Control Cable (Simple and Trouble Free)
Heat Performance Page (Here)
ProChem After Markets (HERE)
ProChem After Markets (HERE)
THE DEAL THAT'S COOKING! (DETAILS)
White Magic Company may be out of Business, but you can keep your White Magic Truck Mount in Business! 

We build for White Magic Truck Mounts as well.
More Prochem 800A Heat Exchangers Pictures
We also Build Heat Exchangers for the HydraMaster CDS PTO TMs.
The Best Built Header on The Market! Solid Heavy Gauge Stainless!
Hi Pete!

About 3-4 years ago I purchased a Heat exchanger from you. I modified a prox. 30+ years old Steamway Odessy, and fitted in. Then I haven?t used it, because I had a good high paying job as a tradesman, at the time. I lost my job a year ago, so I finished off my little project, and started to clean carpet, with the hope; I get to know the guys in the industry, and can start repairing equipment for them. I also have a few little ideas to develop and make some accessories for the cleaning industry. I was cleaning a big school with another guy, who have a $20 000.00 plus truck mount, and his jaw dropped down, when he see me operating with your heat exchanger in an old machine. We all lose 20-degree +, when running 150+ hose, but when you see the heat pouring out from my wand, and see how is cleaning, you don?t need to check the temperature. When I record it, I was running with 200-feet hose. It is good is many expensive unit out there. I made a little movie clip from my wand with my mobile phone, I would like you to see it, don?t know how I can send it, in Contact us not have place for attachment. I am thinking on a small way, specialize converting some older units with a new heat exchanger, for the ones who can't afford a new machine. The problem is to get it here, Thanks for a good product, Regards; Tamas Tassonyi I am in Melbourne, Australia.


Name:Tamas Tassonyi
Email address:tassonyi@ymail.com
Phone:61430447760
More Testimonials
Melbourne, Australia  January 22, 2014
More Testimonials (HERE)
Performer Cub XL Installation Video (HERE)
Heat Exchanger

From:Cruzzin66@aol.com
To:pgarland@bluebaronmachines.com

Priority:Normal
Date12-30-2013 06:10 PM

Hey Pete,

 Just wanted to say thanks again and it was great seeing you. You should 
be proud of all your hard work and designs you've done.. I finally got 
some time to install and mount the heat exchanger you made me and its doing 
well on my Spitfire. Hopefully you get your building done in back soon so 
you have some extra room to maneuver all that equipment.. :)

  Thanks,
  Mike
Hi Peter

My Partner and I are very happy with the work you did on our Performer Cub XL. I can see Great Skilled Workmanship went into this Heat Exchanger to make such a perfect Fit into my machine.

Just knowing there is someone like you that can build a Discontinued Prochem Cub Heat Exchanger, makes you a "Life Saver." My machine is like New now and the Axis Point Heater Design is giving us better Heat than the Old Original OEM Heat Exchanger.

Again Many Thanks for a Great Job!

Ray from R & J Carpet-Tile & Grout Cleaning LLC
Tele: (727) 226-0052
Email: raymond.widing@yahoo.com

​Blue Baron / Red Baron TM Truck Mounts & Axis Point TM Heat Exchangers are Trademarked Products of Blue Baron Carpet Cleaning Systems, LLC.

All of our Patented and Trademark Products are identified and Owned by Blue Baron Carpet Cleaning Systems, LLC and its Assigned Members and are under registration with the U.S. Patent and Trademark Office with all Rights Reserved . Any unauthorized use of Blue Baron Carpet Cleaning Systems, LLC Name, Patents & Trademarks are prohibited by Law and will lead to legal action.
T-Bowe's, LLC Carpet, Tile & grout Restoration

Thomas Bowe Sir & Jr

American Owned & Operated
Truck Mount System
Bonded & Insured

I am the owner of T-Bowe's Carpet Tile & Grout Restoration LLC and my Chevy 3500 is equipped with a Blue and Red Baron Truck Mount Carpet and Tile Cleaning Machines Made right here in the U.S.A. It tackles the toughest jobs with plenty of Hot Heat and and Power... It handles High Heat & High Pressure with easy... It hasn't let me, down running strong.. I am very happy with the owner, any question I have he is happy to help.. If you are in the market for a new Truck Mount or even a new 4 Axes SUPER HOT HEAT EXCHANGER Call Blue Baron Highly Recomended...
Like · · 

(813) 448-2277
www.t-bowes-carpet-tileandgroutllc.com



1 inch Pipe
1 1/2 inch Pipe
Regular Price: $495.00
Sale Price: $425.00   SAVE $70
Item # HDR32 (1.5 inch Pipe)
Name: Martin Hovatter
Email address:kidderamanda@yahoo.com
Phone: Furnished Upon Request

Message:What can I say about my heat exchanger? Excellent! Peter and his wife are great people to deal with especially with technical issues.Shipping and packaging was good and the exchanger was just as described.I will definetly be doing business with Blue Baron again-Thank You, Martin Steam-Works


Jul 24, 2014 at 6:44 PM

Name: Chris Nierling
Email address:rugmaster7@aol.com
Phone: 352-572-9184

Message:I am the owner of Chris Carpet Care Inc in Ocala/Belleview/The villages Fl. I hve had my own business for 20 years and been carpet cleaning for 34 years. I was around people that knew how to put machines together so I have had experience with different kinds of equipment. In all my years the heat exchanger that Pete makes is by far the best exchanger I have ever used. I get excellent heat off the engine. Its compact and well built. In the two years I have had it it has made a difference in my cleaning excellence. Thank you Pete for a wonderful piece of equipment. Chris Nierling Chris Carpet Care Inc.

July 24, 2014 at 6:44 PM

 Name: Chris Nierling
 Email address: rugmaster7@aol.com
 Phone: (Furnished Upon Request)

  Message:  I am the owner of Chris Carpet Care Inc in Ocala/Belleview/The villages Fl. I have had my own business for 20 years and been carpet cleaning for 34 years. I was around people that knew how to put  machines together so I have had experience with different kinds of equipment. In all my years the heat  exchanger that Pete makes is by far the best exchanger I have ever used. I get excellent heat off the engine. 
Its compact and well built. In the two years I have had it it has made a difference in my cleaning excellence.

 Thank you Pete for a wonderful piece of equipment. Chris Nierling Chris Carpet Care Inc.


VIDEO PLAYER by stream services
We build Prochem After Markets to fit most Prochem Truck Mounts using Axis Point TM Technology with Higher Quality Construction / Longer Life and Better Performance at a fraction of the OEM Price!
More Information / Pictures for Performer Cub XL
Shooters Scott
September 2 at 8:05pm
anyone who understands heat exchangers knows that what Pete has designed is flat out awesome. I say this because i purchased one from Pete through Ebay and am 100 % satisfied from the results of this coiled stainless steel heat exchanger. I have been looking for a coiled heat echanger made of stainless steel for many years. Not only is this flat out perpormance but well designed as well. Pete delivered on time plus a low cost in shipping. I have a custom designed machine that has a 27 hp Kawasaki engine and a roots 45 blower. I look forward to doing more business with pete in the coming years and would recommend this unit to anyone. If you have been using proane copper STOP you will be disappointed because copper cracks. Stainless steel coils are the way to go. I have been in business for 22 years ( allcolorscarpet cleaning dyeing) out of indianapolis. Way to go Pete hope your hand is doing better
Testimonial Entered into FaceBook
Name:Russell
Email address:Info@CarpetClinicOrlando.com
Phone:407-697-1622

Message:

 Hi Pete, The Heat exchanger you built for me works perfect on my old cub.I very much appreciate the extra time and effort you offered me in removing the old heat exchanger and assisting me on installing the new one.Pete you went above and beyond to assist me when i needed to get my machine up and running and just want to say thank you ! Thank you, Russell Carpet Clinic of Orlando Inc
SpitFire TMs using Axis Point
Heat Exchangers
****Replace**** ChemTex TMs 'OLD ART POOR DESIGNED LOW HEAT' Heat Exchangers
with our Proven Patented Axis Point Design
Heat Exchangers

Name:Jamel
Email address:jhilaire@melloscarpetcleaning.com
Phone:973-277-1860

Message:Pete - Prior to purchasing your heat exchanger I used a Little Giant which produced good heat however the safety issues were too much to deal with. So I purchased your heat exchanger which can be outfitted to just about any carpet cleaning machine which makes it a must-have for a serious carpet cleaning professional and not only was it safe, but it also bought my cost down because I no longer needed to purchase propane and it performed perfectly! I highly recommend this unit to all carpet cleaning. I received the unit in excellent time and had no complications. Your service was just as good as your unit performs. I am looking to outfit a 2nd machine soon and look forward to doing business with you again! Thanks.
RATED 900 PSI
(ONLY)
Coil Replacement for the White Magic Rebel Blower Heat Exchanger

Hello,

 I spoke to you earlier regarding a receipt for a heat exchange that I purchased from you on 04/28/2014 for 1,107.45. My company is All Pro Floors & More, Inc. 

Also, I would like to let you know this is one of the best heat exchanges I have seen. It was equipped perfectly for my machine and my water is hot in seconds. I am very satisfied and happy with Blue Baron Carpet for their service and timeliness in delivery of my product. I would definitely recommend them. 

Thank you again!
Anne Marie Bailey
President
All Pro Floors & More, Inc.
Email: AllProFloorsandMore@outlook.com 

We Build Prochem's Discontinued Blazer XL Heat Exchanger After Market using a Better Internal Design


Name:BRIAN LAFFERTY
Email address:KINGSCLEANMASTER@gmail.com
Phone:215-668-6980

Message:wow what heat I HAVE RAN EVERY KIND OF SLIDE IN TRUCK MOUNT THERE IS FROM STEAMACTION TO PRO CEM WHICH I RUN A 405 PERFORMER I HAVE BLUE BARON'S AXIS POINT QUAD HEAT EXCHANGER ON A PANTHER AND I HAVE AS MUCH HEAT AS I WOULD EVER NEED. THE BEST HEAT ON THE MARKET TODAY!

B LAFFERTY

Keeping your 
Business Turning 
without the MIDDLEMAN!
Blue Baron  Manufacturing
The Nation's **FACTORY DIRECT LEADER** Leader in Heat Exchanger Truck Mount Technology
We Build Prochem After Markets
Performer Cub XL Installation Video
Like Us and SAVE 5%........
I purchased the heat Exchanger from Pete and I couldn't say this is one of the best Heat exchangers I have ever used . I installing my heat exchanger to a kolher 25 hp engine and I can say my water temperature is around 200°F plus in less than 5 Minutes of using my carpet truck mount . It's made from 100% stainless steel heavy-duty built to last. I took a look inside the heat exchanger from one of the openings from the exhaust side and you can see the stainless steel tubing inside heat exchanger so that your water temperature could heat up quicker . I clean Carpets that are from Apartments restaurants with heavy grease and I could say that this heat exchanger made a lot a difference in my new cleaning technique. Since my water is hotter I can use less solution that saves me money. I would recommend n e one to get this heat exchanger stop looking around and just buy this one you will be very happy with the design . Thank you Pete once again for creating such a good heat exchanger you had made a customer very happy and I will gladly come back again . 

Jesus Alcantar            Email: eljesus210@hotmail.com


We build Heat Exchangers for all PTOs with a Better Design with the Highest Quality at a fraction of the Cost!
Name:BRIAN LOFSTEN                                                                                                          May 1, 2015
Email address:BRIANcharlie1@aol.com
Phone:941-255-9722

Message:Just wanted to let everyone how happy we were to purchase a heat exchanger from Pete. He is very professional & knows his work. Ordered a heat exchanger & header from him and received it in about a week. I hooked up everything & the header I ordered was a little wide because it was interfering with the pump belt. I called up Peter & he said to send it back and he would laser cut it & weld it for for me for no charge & send it back! Very happy with his service & product! Thanks again Pete! I am a happy customer & will be using you again . Brian
Tree Capital Cleaning                                                                                            April 16, 2015
Don Hines 
Perry,FL
Tele: (850) 838-7371 

Hi Peter

I just wanted to let you I am very happy with my purchase of this Heat Exchanger. It was just a beautiful experience. I just thought I let you know.
Thank you and have a good day. Don
Hi Pete

Can not tell you enough how happy I am with the Axis Point Heat Exchanger. Thank you for being there for me and all your help. 

Thanks again, Dan Hensley 

Email: Dan30@earthlink.Net

Blue Baron Carpet Cleaning Systems, LLC shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Blue Baron Carpet Cleaning Systems, LLC and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufacturer's warranty and any other rights provided by law against the manufacturer. Blue Baron Carpet Cleaning Systems, LLC makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed

Ever Ready Carpet Cleaning                                                                                                        April 17, 2016
Rochester, MI 
Owner: Mike Allen
Tele: 248-953-3702

​Pete,

I just wanted to let you know that you did a Great Job Fabricating this Heat Exchanger. It is very well constructed and really puts out the heat! I am very happy with the results.

Many Thanks,
Mike
LP
Heater
Little Giant Heaters
Kevin D McNair                                                                                                      June 9, 2015              Round Rock, TX 78664
Email: KevinMcnair@gmail.com

Hi Pete 
It was pleasure working with the Axis Point Heat Exchanger, where the Heat is Smoking Hot and consistent. So many Heat Exchangers I used in the past always fluctuated where it was impossible to get steady heat. Thanks for the Great Job!

Many Thanks,
Kevin


White Magic Pro 1200
Namco Truck Mounts
Roy Bolton <roy_bolton64@yahoo.com> 6/19/20
Tojgarland1957@yahoo.com Today at 12:38 AM


I have received my axis point heat exchanger and with some expected fab work it works as expected. Pete is a good guy to deal with and knowledgeable about what he he sells. I converted a CHEM-TEX truck mount to his heat exchanger. I had no luck with Chem -Tex , they are metal to metal construction and I had them tig welded many times due to vibration. Chem-tex is a very poor design. We are getting good heat now with the axis point heat exchanger . Customer service is every thing when you are dealing with a small company. That is why I try to deal with independent businessmen. After all I'm a small business . Also his warrantee is simple and to the point no small print . I called Pete many times and he was always available for questions. Thanks Pete!
CHECK OUT THE INDUSTRY STAINLESS EXHAUST DIVERTERS OF THIS KIND ARE A RARITY! 
DEPENDING ON THE SIZE OF YOUR HEADER, WE CAN FABRICATE PIPE SIZES FROM 1 INCH, 1 1/4 INCH & 1 1/2 INCH AT NO ADDITIONAL CHARGE
Regular Price: $495.00
Sale Price: $425.00   SAVE $70
Item # 125EDIV (1.25 inch Pipe)
We are the ONLY Fabricators of the Prochem 405, Legend, Bruins, Bridge Point Lancer, Saber, Trail Blazer Etc. After Market Heat Exchangers
We build After Market Heat Exchangers for the discontinued Blazer Plus 
We also build Heat Exchangers for the discontinued Performer Cub XL
     HEAT EXCHANGER       SPECIALS