All NEW Belt Driven Series of Blue Baron  Truck Mounts
These Heavy Duty Pulleys /Belts have a Ratio which gives a 90% RPM of the Maximum Speed allowable Speed for your Blower even when the Engine is Full Throttle. This will extend the Life of your Blower as Manufacturer Suggested. 
Our Belt Driven Series of Blue Barons are Engineered for "Easy Access" to the Blower and Pumps Bolt / Nut Support System makes it a "Snap" to replace a Belt. 15 to 20 Minutes or less. No more Canceled Jobs because Lengthy Time for Belt Replacement.
No more waiting in line at the repair shop!
Our Frames are designed for easy Access to all Components. This is a "Repairman's Dream"! 
Our Easy Belt Tensioner and our Angular Bracket Guide Stop will always give you Expert Alignment everytime.
All our Pump / Blower Support Bases are Open Slotted for quick fastener Removal.
Blower Guide Stop Gives True Expert Angular Belt Alignment 
PERFECT EVERY TIME
Perfect Expert Alignment everytime.
PURE FRUSTRATION....IMAGINE WHAT THIS GUY MUST BE GOING THOUGH!!
All our Frames are equipt with Pull back Stops to give you PERFECT BELT TENSION
Mounted on the Frame in the rear of the Pump, is a threaded Bracket that insures your Belt Angular Alignment coming off the Diver / Driven Pulley is PERFECT
WE USE B SIZE SERIES COG BELTS OF THE HIGHEST QUALITY INDUSTRIAL BELTS IN THE INDUSTRY. THEY RUN COOLER AND GIVE TRUE 1 TO 1 RATION OF GRIPPING POWER WITH VERY LOW SHEDDING AND WEAR.
******BEWARE OF TRUCK MOUNTS WITH "THE RUBBER FLUBBERS"***** UNRELIABLE DIRECT DRIVES CREATE FREQUENT AND SUDDEN BREAKAGE LEAVING YOU WITH NO VACUUM, FLOODED CARPETS, 
WORST......ANGRY CUSTOMERS AND WILL RUIN YOUR BUSINESS!!  

WATCH OUT FOR TRUCK MOUNTS LIKE THE El DIABLO, TCS, THE RAGE, CHEM-TEX, STEAM ACTION as well as AMTEX UNITS TO NAME A FEW!!!!

Double left click here




​Karl Dwayne Jaco
Email: dwayne_jaco1967@hotmail.com

In reference to the belt drive verses coupling drive system. First of all ,I have had both. I will no longer have a coupling drive due to several reason. First and foremost, safety! On several occasions we have approached the machine to cut it off and it has cut loose on us sounding like a cannon, pieces flying everywhere, believe me you don’t won’t to be hit by those pieces. Second they are time consuming to replace usually having to loosen engine or blower to replace . Belts are able to have a little more play , where coupling tolerance have to be pretty well dead on, if not good luck putting the right amount of metal shims in to get tolerance right , yes I have run both types of couplings on to find changing them every 3 months! I personally prefer not to use my time changing those things. I’ve had a Blue Barron Truckmount for 2 years, still running same belts ! I have found that the Blue Barron is hands down the best system I have ever ran!! Just my 2 cents , Dwayne J. From Tennessee

Daniel Williams
Email: dw72176@gmail.com 
Pete builds a truly awesome piece of equipment and I never had any issues with Blue Baron 47 XL Belt Driven Truck mount. The Belts are all B size Cog belts and the BX30 same size for both pump and Blower.Other Truck Mounts with these direct drive couplers are twice the price up to 40K with the Head Aches these Direct Drive machines give, along with a depleted bank account. I remember when a house was 40K.....are you kidding me. 



Bill Keen
Email: scalpmnoles2@yahoo.com

Pete builds great quarter inch truckmount frames great truckmounts with the open concept to let the truckmounts to remain cooler . The belt driven truckmounts are very easy to change out, and also to maintain the maintance also is very easy with hoses from the motor to change the oil to the ar pump. Also these unit have great vacuum and heat
To clean in the industry. Also he has heat exchangers for other manufacturers unit . : example prochem hydra master ,etc . Please visit his webite blue barron truckmounts . We have a compact 45 best decision we made as a restoration company in central fla .




We ordered our 1st Blue Baron machine from Pete Garland in December, 2016. He explained that the was making changes in his design and that we would get a new machine with all the new features. We took delivery the last week of January, 2017 and self installed the machine using our old White Magic recovery tank. We have now been using our Blue Baron daily for 15 mos. and have spent only $6.00 on repairs, and that was a hose crimp. I certainly would recommend Pete and Blue Baron Carpet Cleaning Systems to anyone and would make the same purchase again. By the way, one week of delivery delay was by the trucking co. Old Dominion. They put the machine on the wrong truck in Florida. It went to the Pa. terminal and then back to Tennessee. Thanks Pete Garland for your service and a great machine.

Jerry Larkins Larkins Carpet Steam Cleaning Gray, Tn. since 1971
Email: JerryLarkin@msn.com



Monte Bertoldo 3/19/2019
Email: pcc@roadrunner.com

I now have 300 hours on my machine using the original belts. This has been a Great Machine with Great Heat and suction and easy to maintain. My Competition saw the Heat and suction this 'Skinney' Less expensive machine produces up against there overpriced Large Prochems and were amazed that the Heat was even better!
I am very happy. Thank you for all your hard work Pete.
Remember, Not all Truck Mounts are built as well as the Blue Barons. Our Truck Mounts are Factory Built, and NOT 'Private Label'. Avoid a 'Middle Man' Mark Up. 
The Steam Action Truck Mounts are nothing more than TMF Private Labeled ProFire & StarFire truck mounts that are not only a 'Over Priced' Huge Mess of Poor Quality disorganized assembly but is made by a Company that has Bad Service. Avoid using this Dangerous Frequently Breaking Coupler System. This can cause injury to you and your business. Stay Away from these Problematic Truck Mounts!
18 years building, with a Strong Testimonial Following, means we know what we are doing in building the Best this Industry has to offer!